AUTOMATIC PRODUCTS TRANSFERER

The equipment can transfer up to 7 chemicals independently managing both the replacement of the product, the destination reservoir and anti-overflow system.

The level detection is performed by a buoy appropriate to the chemical nature of the product transferred. The operating voltage is 12VDC float. This can be adjusted in height to set the minimum amount or reserve product we want to set in the destination reservoir.

The electronic system can be calibrated for any tank size; these may be of varying sizes and shapes.

In normal operation, the computer screen shows us the product number, numbered from 1 to 7, which is siphoning.

The equipment detects if the containers or nurse tanks are emptied, if the pumps do not work, or if for any reason no product is transferred, without probes or sensors in them. In the previous case the equipment will give us a sound-light alarm and the screen will indicate the number of deposit that caused the problem.

The anti-overflow buoys system is completely independent of the electronic controller and remains active even in the event of total failure of it, ensuring the locking system in case of failure by activating the relevant alarm.

The device is designed for automatic transfer of up to 8 products from one tank to another. For example, we can transfer from a 1000L container to smaller tanks of 100L located under de Elados pumps so they do not have suction problems.

In the case of problems with communicating vessels, a valve for chemicals that operate in parallel with the pump will be added to the installation to avoid this unwanted effect.